Dwyer Series 16G 1/16 DIN Temperature/Process Controller, p/n# 16G-23-11
$172.00
Dwyer Series 16G, 8G, AND 4G Temperature/Process Loop Controllers allow for monitoring and control of temperature or process conditions. The controller features two independent control outputs for dual loop control using on/off, auto-tune or self-tune PID, fuzzy logic, or manual control methods. RS-485 interface is included with Modbus® communication protocol, for easy bench-top configuration or integration with a PLC or data control system.
Features:
Features:
- On/off, PID, Fuzzy Logic, or Manual Output Control
- Constant, Sloped, Program (Ramp/Soak), or Remote Set-Point Control
- 2 Primary Control Outputs, 2 Secondary/Alarm Relay Outputs, and RS-485 Standard on All Models
- Options for Event Input Functions Available with Optional Hardware
Applications:
- Oven control
- Packaging equipment
- Parts washers
Specifications:
- Inputs: Thermocouple, RTD, DC voltages or DC current.
- Display: Process value: 4 digit, 0.47 ̋ H (12mm), orange LCD; Set point value: 4
digit, 0.47 ̋ H (12mm), green LCD. - Accuracy: ± 1.8°F plus ±0.3% of span (±1°C plus ±0.3% of span) at 77°F (25°C)
after 20 minutes warm up. - Power Requirements: 100-240 VAC -20/+8%, 50/60 Hz; Optional 24 VDC,
±10%. - Power Consumption: 5 VA max.
- Operating Temperature: 32 to 122°F (0 to 50°C).
- Storage Temperature: - 42 to 150°F (-20 to 65°C).
- Memory Backup: Nonvolatile memory.
- Control Output Ratings: Relay: SPST, 5 A @ 250 VAC resistive; Voltage pulse: 12
V (max. 40 mA); Current: 4-20 mA; Linear voltage: 0-10 V. - Alarm Relay Ratings: 3 A @ 250 VAC resistive.
- Communication: RS-485 Modbus ® ASCII/RTU communication protocol.
- Weight: 9 oz (255g).
- Front Panel Rating: IP66.
- Agency Approvals: CE, cULus.