Greyline PSL 5.0 Pump Station Level Controller p/n# PSL 5.0
The Greyline PSL 5.0 Pump and Lift Station Level Controller is ideal for sewage pump stations, lift stations, wet wells, and tank level control with a non-contacting ultrasonic sensor mounted above the liquid. The PSL 5.0 Level Controller has six independently programmable control relays for pump or valve control, level alarms, dialers, temperature alarm, and echo-loss alarm.
Mount the non-contacting, ultrasonic sensor in the tank or wet well and install the watertight electronics in the control room or any location within 150 m (500 ft). Use the simple menu system and built-in keypad to set up measurement range, relay set points, and pump alternation sequence. A relay/pump run time report is updated and stored automatically for viewing on the PSL 5.0 backlit LCD display.
For hazardous locations, the ultrasonic sensor is rated intrinsically safe with an optional safety barrier. It is rated for measurement ranges up to 10 m (32 ft), or use the optional PVC Sensor rated for 15.6 m (50 ft) measurement range.
Dual-Technology Sensor Feature for Redundant Level Monitoring
Connect a submersible pressure sensor or other 4-20mA level transmitter to the PSL 5.0 for fail-safe hybrid sensing. The PSL 5.0 will auto-calibrate the redundant sensor and if the signal is lost to the ultrasonic sensor, the redundant sensor will seamlessly take over monitoring until the signal resumes from the ultrasonic. The redundant sensor is continuously monitored to ensure availability during primary sensor failure.
- Low Cost
- Isolated 4-20mA Output (1000 ohm)
- Large LCD Display
- Programmable Signal Relay
- Non-Contacting Ultrasonic Sensor or Optional Pressure Sensor
- Built-in 2-Key Calibrator
- Watertight, Dust-tight Enclosure