Siemens EchoMax XPS-10 Ultrasonic Level Transducer, high frequency, continuous, non-contact, 32.80 ft. (10m), for liquid and solid applications. Mounting thread and facing: 1″ NPT ((Taper), ANSI/ASME B1.20.1), cable length: 98.43 ft. (30 m) flange, flush mount: no flange approvals: ATEX II 2GD, FM Class I Div 2/SAA Class 1 Zone 1 .

Mounting Recommendations:

  Special handling precautions must be taken to protect the face of the transducer from any damage

  Mount the transducer so that it is above the maximum material level by at least the blanking value (0.3m for XPS 10 F and 0.45m for XPS 15 F)

  On liquid applications, the transducer must be mounted so that the axis of transmission is perpendicular to the liquid surface

  On solids applications, a Milltronics Easy Aimer should be used to facilitate aiming of the transducer  

  Do not over-tighten mounting. Hand tightening of the mounting hardware is sufficient

  Secure installation by connecting a safety chain from the transducer to a structural member

  Consider the optional temperature sensor when mounting the transducer