AGM Converter Pulse Duration Receiver, Dry Contact Input, W/Xtal Time Base (plug-in replacement module, spare part), 24 VDC.

The 5100 is available in several variations – 1) Pulse Duration to Analog, 2) High Frequency (> 30 Hz full-scale) to Analog, and 3) = < than 30 HZ full- scale ( ( ) 5107)). The converters use digital and analog circuitry to convert the pulse duration or frequency to a proportional analog signal. Various drivers are used to create the desired output analog type. The inputs and outputs are isolated from the power source. All converters have adjustments for offset, span, and output loop compensation. The frequency to analog converter also has a filter adjustment for smoothing.

The converter is powered by an external 24 VDC source. 115 and 220 VAC powered assemblies are available.

These options are denoted by the number 5100/5107 suffix as described under Product Description in the AGM ‘Product Index’.

1) The pulse duration input may be ordered as a voltage pulse of dry contactinput. Isolated and non-isolated input options are available. Also, an optional input repeater relay or second analog output is available. When ordering, specify input type, zero/full scale range (EG 3/12 sec, 15 sec), output (EG 4/20 mADC), power and mounting.

2) Virtually any type of pulse and frequency range can be specified. Typical pulse types include AC, 5-Volt TTL, 10 to 30-volt pulse, etc. Options include 12 VDC excitation voltage and fixed divide output. When ordering, specifyinput type, zero/full scale range (EG 0/1000 Hz), output (EG 4/20 mADC), power and mounting.

3) The third option is preferred for low speed application when fast responsewithout ripple is required. Typical applications include electrical power company demand meter and older flow meter pulse rate to analog conversion.

Virtually any type of pulse and frequency range can be specified. Typical pulse types include dry contact, 5-Volt TTL, 10 to 30-volt pulse, etc. Optionsinclude 12 VDC excitation voltage and fixed divide output. When ordering, specify input type, zero/full scale range (EG 0/1000 Hz), output (EG 4/20 mADC), power and mounting.